Bacteroides Heparinase I

Catalog # Concentration Size List Price Quantity Your Price
P0735L 12000 units/ml 600 units $522.00
$469.80
P0735S 12000 units/ml 240 units $262.00
$235.80
Catalog # Size List Price Your Price
P0735L 600 units $522.00
$469.80
P0735S 240 units $262.00
$235.80
Catalog #
Qty:
 
*On-line ordering is for Canadian customers only. Web pricing is applicable only to orders placed online at www.neb.ca

Bacteroides Heparinase I, also called Heparin Lyase I, is active on heparin and the highly sulfated domains of heparan sulfate. The reaction yields oligosaccharide products containing unsaturated uronic acids which can be detected by UV spectroscopy at 232 nm.

  • Recombinant enzyme with no detectable glycosidase, sulfatase or uronidase contaminating activities
  • ≥95% purity, as determined by SDS-PAGE and intact ESI-MS
  • Optimal activity and stability for up to 12 months when stored in solution at -80°C
  • Optimal for use in coagulation studies
Bacteroides Heparinase I cloned from Bacteroides eggerthii, also called Heparin Lyase I, is active on heparin and the highly sulfated domains of heparan sulfate. The reaction yields oligosaccharide products containing unsaturated uronic acids which can be detected by UV spectroscopy at 232 nm.

Bacteroides Heparinase I cleaves the glycosidic bond between N-sulfated hexosamines and 2-O-sulfated iduronic acid residues, between these same as well as the 2-O-sulfated glucuronic acid residues. The 2-O-sulfated uronic acid residue is essential for the activity of Bacteroides Heparinase I and 6-O-sulfation of GlcNS does not hinder enzyme activity. 



Product Source
Cloned from Bacteroides Eggerthii and expressed in E. coli.
Reagents Supplied

The following reagents are supplied with this product:

NEB # Component Name Component # Stored at (°C) Amount Concentration
  Bacteroides Heparinase I P0735SVIAL -80 1 x 0.02 ml 12,000 units/ml
  Bacteroides Heparinase Reaction Buffer B0735SVIAL -20 1 x 1 ml 10 X
  Bacteroides Heparinase I P0735LVIAL -80 1 x 0.05 ml 12,000 units/ml
  Bacteroides Heparinase Reaction Buffer B0735SVIAL -20 1 x 1 ml 10 X

Properties & Usage

Unit Definition

One unit is defined as the amount of enzyme that will liberate 1.0 μmol unsaturated oligosaccharides from porcine mucosal heparin per minute at 30°C and pH 7.0 in a total reaction volume of 100 μl.

Reaction Conditions

1X Bacteroides Heparinase Reaction Buffer
Incubate at 30°C

Storage Buffer

20 mM Tris-HCl
100 mM NaCl
5 mM CaCl2
1 mM EDTA
pH 7.5 @ 25°C

Heat Inactivation

100°C for 1 minute

Molecular Weight

Apparent: 42 kDa

Unit Assay Conditions

Two fold dilutions of Bacteroides Heparinase I are incubated with 1 mg/ml porcine mucosal heparin substrate in 1X Bacteroides Heparinase Reaction Buffer, in a 100 μl reaction. The reaction mix is incubated at 30°C. Liberation of unsaturated oligosaccharides is detected by real-time UV spectroscopy at 232 nm.

Notes
  • Avoid repeated freeze-thaw cycles.
  • Reaction Conditions:
    1. Combine 10 μl of 1 mg/ml heparin substrate, 10 μl Bacteroides Heparinase Reaction Buffer and H2O in a total reaction volume of 100 μl. 
    2. Add 1 μl Bacteroides Heparinase I. 
    3. Incubate reaction at 30°C for 1–24 hours (monitor absorbance at 232 nm for determination of partial or complete digestion). 
    Optimal incubation times and enzyme concentrations must be determined empirically for a particular substrate.
References
  • Landry, D. et al New England Biolabs, Inc.. Unpublished observation
  • Yamada, S., Murakami, T., Tsuda, H., Yoshida K., Sugahara, K. (1995). J. Biol.Chem. 270, 8696-8705.
  • Merchant, Z.M., Kim, Y.S., Rice, K.G., Linhardt, R. (1985). J. Biol.Chem. 229, 369-377.
Tech Tips
  • Bacteroides Heparinase I cleaves highly sulfated heparin/HS chains

    Bacteroides Heparinase I is most active between pH 6.5-7.5

    Bacteroides Heparinase I is calcium dependent and has greatest activity in the presence of 1.5 - 5mM CaCl2.

    Bacteroides Heparinase I can be used in double digests with Bacteroides Heparinase II and III using the Heparinase reaction buffer.

Quality Control Assay
Quality Control tests are performed on each new lot of NEB product to meet the specifications designated for it. Specifications and individual lot data from the tests that are performed for this particular product can be found and downloaded on the Product Specification Sheet, Certificate of Analysis, data card or product manual. Further information regarding NEB product quality can be found here.
Specifications
The Specification sheet is a document that includes the storage temperature, shelf life and the specifications designated for the product. The following file naming structure is used to name these document files: [Product Number]_[Size]_[Version]
Legal And Disclaimer

Products and content are covered by one or more patents, trademarks and/or copyrights owned or controlled by New England Biolabs, Inc (NEB). The use of trademark symbols does not necessarily indicate that the name is trademarked in the country where it is being read; it indicates where the content was originally developed. The use of this product may require the buyer to obtain additional third-party intellectual property rights for certain applications. For more information, please email busdev@neb.com.

This product is intended for research purposes only. This product is not intended to be used for therapeutic or diagnostic purposes in humans or animals.

New England Biolabs (NEB) is committed to practicing ethical science – we believe it is our job as researchers to ask the important questions that when answered will help preserve our quality of life and the world that we live in. However, this research should always be done in safe and ethical manner. Learn more.

Top